Make the World Better
Sulfide vulcanization of waste tires

Sulfide vulcanization of waste tires

Vulcanization refers to the process of converting the plastic compound into elastic rubber or hard rubber by means of high temperature and high pressure, so as to obtain service performance. To be carefulVulcanization is carried out in a flat vulcanizer. We use steam heating to adjust the temperature to 150 ℃ and the pressure to 1 MPa to send the film into the vulcanizer, and then turn on the vulcanizer for vulcanization. The pressing time is 5 minutes, and the vulcanization can be completed. The length of each vulcanizable rubber plate is 6 meters. After completion, the rubber plate is fed inside and vulcanized again. The press forming part of the vulcanizer can be pruned. Use a long ruler to straighten the film, and then use a cutter to cut off the parts with uneven edges and corners to make the film more orderly. In this way, the production of recycled rubber plate is completed.The method of vulcanization requires a high technical content and the funds invested are also high. GEP Machinery's tire shredder uses a physical mechanical method to shred the used tires to the required size. The tire shredder of GEP Machinery has simple operation, high output and good safety factor. GEP Machinery's tire shredder has been exported to more than 100 countries and regions around the world, and has been recognized and trusted by everyone.

Need Help? Contact With Us here

Submit Your Requiments