Make the World Better
waste shredder machine hammer protection (3-4)

waste shredder machine hammer protection (3-4)

3. The waste material to be crushed should be put into the crushing cavity of the waste shredder machine at a constant speed to avoid overloading the motor or blocking the material in the crushing cavity and increasing the wear of the hammer head. When the machine is shut down due to the blockage of the waste material, the power should be turned off immediately, and the waste materials should be cleaned before starting work, otherwise it may cause unnecessary damage to the hammer.4. Different types of waste shredder machine feed sizes and volumes are different. The feeding over assembly causes problems such as stacking of cards and low production efficiency, increasing the operation load of the equipment and increasing the incidence of equipment failure.At the same production intensity, the feed is too large to reduce the service life cycle of the parts.The waste shredder machine is mainly used for crushing various waste aluminum, scrap iron, oil drums and other wastes. It is widely used due to its simple structure and high production efficiency. Hammer head is the main component of the waste shredder machine. GEP Machinery has higher quality and requirements for the hammerhead. More customers are welcome to consult.

Need Help? Contact With Us here

Submit Your Requiments